Skip to product information
  • Kit de bloqueo de ajuste del motor de gasolina 1.6 BMW N40/N45/N45T

1.6 BMW N40/N45/N45T gasoline adjustment lock kit

$80.80
$80.80 $90.94
You save 11% ($10.14)
Tax included. Shipping calculated at checkout.
Size
Color

Description

It is a complete tools set for the adjustment of the distribution in gasoline engines 1.6 BMW N40, N45, N45T and for the alignment of vain units in admission and exhaust cams trees. Manufactured in the highest quality, this motor synchronization tools kit is designed for a long shelf life in the daily use of the workshop and categorized in industrial degree, in addition to disposable. All tools are classified into a blown -molded case to facilitate storage and transport.

  • Apt to establish and adjust the time in gasoline engines BMW N1.6, N40, N45T and to align the vain units in the input and output camshafts
  • It contains important tools for the change of distribution straps, the change of packaging of the head of the cylinder, the configuration of the camshaft timer, the adjustment of the vain adjustment unit
  • Assembly and disassembly of the camshaft, as well as the polarization of the chain tensor
  • Suitable for:
  • BMW 116I, E81 and E87
  • BMW 316I, E46 and E9
  • BMW 316CI, E46
  • BMW 316TI, E46
  • With the motor code N40, N45, N45T
  • Content 6 pieces:
  • Vain alignment plate to use as OEM 117260
  • Camshaft adjustment plate (input) to use as OEM 117 251 (117250)
  • Petting plate of the camshaft (exhaust) to use as OEM 117252
  • Preload tool for the distribution chain tensioner to use as OEM 119340/119341
  • Steering wheel locking pin as OEM 119190
  • Fixing screw of the camshaft adjustment plate to use as OEM 117253
  • It is supplied in a blown -molded case
  • Dimensions: 33 x 31 x 23.5 cm
  • Design of the highest quality for a long shelf life in the daily workshop

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.