Skip to product information
  • Vetonek Lijadora de disco 800 W 305 mm

800 w 305 mm disc sandstone

$404.53
$404.53 $455.30
You save 11% ($50.77)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The disk sander is an ideal machine for your sanding work. This sander, made of cast iron, is very efficient and saves energy and has a working rate of 1450 revolutions per minute. The work table is made of durable aluminum and can bow down at an angle from 0 to 45 °. A groin caliber is also included for precise and exactly groin cuts. Keep in mind that the sander requires self -adhesive sanding discs. Delivery includes all bank assembly materials. The assembly of this article is easy.

  • Color: blue
  • Material: cast iron + aluminum + plastic
  • Table dimensions: 48.5 x 44 x 39 cm (length x width x height)
  • Dimensions of the work table: 41.5 x 18 cm (length x wide)
  • Disc diameter: 305 mm
  • Food: 230 V ~, 50 Hz
  • Power: 800 w
  • Speed: 1450 rpm
  • Inclinable table: 0-45 ° down
  • Rotating gown calibrator: 0-60 ° in both directions
  • IP classification: IP40
  • Easy assembly
  • Delivery includes all bank assembly materials
Do not allow children to play with the device. It is not a toy. Only users with technical skills should use the tool. Use personal protective equipment before using this product. Keep children and people away away while using an electric tool.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.