Skip to product information
  • Vetonek Alfombra de exterior PP azul 80x150 cm

Alfombra de exterior PP azul 80x150 cm

$25.42
$25.42 $28.61
You save 11% ($3.19)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

¡Esta moderna alfombra de exterior es un excelente aporte decorativo para tu patio o terraza! Colócala en la zona de descanso en tu balcón, terraza o patio para que sea más acogedor al instante. Duradera y resistente a los rayos UV: Hecha de polipropileno (PP), esta alfombra está firmemente tejida para ofrecer durabilidad, portabilidad y bajo mantenimiento. Y es resistente a los rayos UV, lo que evita que se decolore o sufra otros daños por el sol.Diseño reversible: Diseñada para ser usada por ambos lados, esta alfombra de jardín tiene dos opciones para que puedas combinarla con la decoración. Si uno de los lados se mancha o te aburres del dibujo, puedes darle la vuelta para dar al suelo un aspecto renovado.Fácil de limpiar: Esta alfombra de exterior es fácil de limpiar. Basta con sacudirla y limpiarla con un paño húmedo, o enjuagarla con una manguera y secarla al aire.Portátil y fácil de guardar: Gracias a su ligereza y a las costuras en el centro, puedes plegar o desplegar libremente la alfombra en una forma ideal para transportarla y guardarla fácilmente cuando no esté en uso.Amplios usos: Esta alfombra de área es adecuada para uso en interiores y al aire libre, incluyendo la cubierta, patio, balcón, jardín, terraza, etc. Información útil:Para una durabilidad y belleza óptimas, te sugerimos que laves a mano la alfombra de exterior a temperatura ambiente.

  • Color: Azul
  • Material: Polipropileno (PP)
  • Dimensiones: 80 x 150 cm (ancho x largo)
  • Estampado: Jacquard de doble capa
  • Montaje requerido: No

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.