Skip to product information
  • set de eliminación de rueda libre del alternador 22 piezas

Alternator free wheel removal set 22 pieces

$51.39
$51.39 $57.84
You save 11% ($6.45)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This Alternator Free Wheel Elimination Kit contains 22 pieces of professionals and plugs. It allows easy extraction of the free wheel alternator pulley, either inside or outside the vehicle. The kit also allows the alternator axis, which will be held while the pulley retention device is removed. This free wheel and remove kit alternator repair includes several adapters to adjust to all the main brands. It incorporates a complete range of TRX-Star combination, Spline and hexagonal adapters to adapt to most altemors. The tool kit is presented in a storage case.

  • 1x T50 T-Perfil Socket Bit, Disco Unit 1/2 ", 33t-110 mm, adapts to Mercedes, A-Klasse
  • 3 x m10 Spline bit plugs, 1/2 "disc unit, 33T-1110mm (BMW Fits, Ford, Mercedes, Vag); 31T-98mm (adapts to Fiat), 110mm (Universal Adjustment);
  • 1 x t50 t-bit profile, 75 mm, universal adjustment
  • 1 x t40 t-bit profile, 75 mm, universal adjustment
  • 1 x m8 internal detado xzn bit, 75mm, universal adjustment
  • 1 x m10 bit xzn inside, 75 mm, adapts to Renault
  • 1 x 10mm xzn internal detado bit, 75 mm, universal adjustment
  • 1 x 8mm bit xzn inland, 75 mm, universal adjustment
  • 1 x M10 Hexagonal 14mm Little Spline, 57mm, adapts to Renault, BMW, Ford, Mercedes, Porsche, Opel, Vag;
  • Special use of the alternator:
  • 1 x 33t-22 mm, adapts to Renault, Mercedes;
  • 1 x 33t-17mm, universal adjustment;
  • 1 x 19 mm, universal adjustment;
  • 1 x 22 mm, universal adjustment;
  • 1 x 21 mm, adapts to Renault, BMW, Ford, Mercedes, Porsche, Opel, Vag;
  • 1 x 4 alternator pin, universal adjustment;
  • 1 x 33t-15mm, adapts to Ford;
  • 1 x 17 mm, adapts to Ford;
  • 1 x 38 mm, 3 poles, fits Toyota;
  • 1 x h28 x h22mm, adapts porch
  • 1 x bits adapter for 10mm bits, 1/2 "unit, universal adjustment

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.