Skip to product information
  • Vetonek Patas de mesa centro forma A 2uds acero antracita 70x(30-31) cm

Central table legs Form at 27th anthracite steel (30-31) cm

$73.01
$73.01 $82.17
You save 11% ($9.16)
Tax included. Shipping calculated at checkout.
Size
Color

Description

These center table legs combine shape and function. They are an ideal option to customize your center table. Durable material: This coffee table leg is made of steel with powder coating, which makes it resistant and lasting. Robust structure: the design in the form of A of the leg of the leg of The coffee table guarantees that it can support a heavy table. Practical design: This center table includes adjustable foot levelers, which guarantees stability even in irregular soils and minimizes scratches on the ground. In addition, the support has pretaladraded holes and screws included in the delivery, which can be used to fix the leg to the table board (not included), which facilitates the assembly. Modern Stética: The table of the table has clean lines and a geometric design that improves the general aspect of the furniture. In addition, it combines well with any table board of an adequate size. Useful information: delivery only contains the table legs, the board is not included.

  • Color: Anthracite gray
  • Material: Powder coating steel
  • Total dimensions: 70 x (30-31) cm (high x width)
  • In the form of a
  • Support dimensions: 600 x 60 x 4 mm (length x width x high)
  • Tube dimensions: 60 x 30 x 1 mm (length x width x high)
  • With adjustable plastic levelers
  • Requires assembly: Yes
  • Delivery contains:
  • 2 x center table leg
  • Screws (M5X18mm) for leg fixing with table board

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.