Skip to product information
  • Vetonek Figura de velas de Navidad con 144 LED 70x42 cm

Christmas candles with 144 LED 70x42 cm

$47.13
$47.13 $53.04
You save 11% ($5.91)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This striking Christmas candles figure is a perfect choice to decorate the garden and inside the house. Outlook resistant material: The Christmas ornament is made of PVC and has a steel structure, so it resists outpatient during all parties. Low consumptionLed: Christmas ornament is decorated with LED lights, which are from Low consumption and long duration. Multicolored pile: The festive ornament is designed with 144 colored LEDs, which provide fun to darkness. Note: Each product comes with a mounting manual in the box to facilitate assembly.

  • LED color: multicolored
  • Material: Steel, polyvinyl chloride
  • Dimensions: 70 x 42 cm (length x wide)
  • LED number: 144
  • IP rating: IP44
  • Tension: 220-240 V ca
  • Power: 8 w
  • Power supply: plug
  • Power cable length: 1.5 m
This product should not be used by children under 14, people with special needs or reduced physical, sensory or mental abilities and without experience in the use of electronic devices. Electricity is dangerous. Damage and inappropriate use or alteration, such as the replacement of individual components, can cause damage to the product and in the power grid wiring, which can cause electric shocks and serious injuries to the user. Do not use this product in the presence of explosives, such as flammable liquids, gases and powders, or at extreme temperatures above 50 degrees Celsius. Do not turn on the product if the connection cable or the adapter are visibly damaged. Do not open or enter anything into electrical accessories or equipment. Doing so can cause serious danger and even an electric shock. If the external flexible cable or the cord of this luminaire are damaged, contact an experienced technician or an authorized service center to replace it and thus avoid risks. Disconnect food during installation and maintenance. Make sure the bulbs have cooled. The light source of this luminaire is not replaceable; When the light source reaches the end of its useful life, replace the product. Use the light cable only when it is completely unwindling. Make sure the cable is not entangled anywhere. Use the light cable alone in combination with an RCD (residual current device). Do not leave the light cable on without supervision.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.