Skip to product information
  • Vetonek Sillas de comedor 4 unidades madera maciza reciclada

Dining chairs 4 units solid wood recycled

$580.13
$580.13 $652.92
You save 11% ($72.79)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This set of 4 pieces of recycled wood of old -style wood will give a special touch to your dining room. Its steel structure makes the chairs stable and resistant. These vintage style chairs are made of solid solid wood, which means that each furniture is unique and slightly different from the following. The furniture made of recycled wood, have the characteristics of different woods, such as teak, mango wood and acacia. Recycled wood is solid, stable, lasting and beautiful. The signs of wear and structure of the visible veins give each piece their own history and a unique appearance. The chair set is completely made by hand and every step of the process is carried out with the greatest care. The open rear design and the multicolored end of the paint add their spectacular retro style. Important note: Colors can vary from one piece to another, so each of our chairs are unique. Shipping is random. Shipping includes 4 dining chairs.

  • Color: Multicolor
  • Material: Recycled solid wood + steel structure
  • Dimensions: 51 x 52 x 84 cm (wide x high x high)
  • Seat width: 41 cm
  • Seat depth: 42 cm
  • Seat height from the ground: 48 cm
  • Open rear design
  • Retro finish painted
  • Delivery includes 4 dining chairs
Maximum 110 kg per seat.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.