Extensible mango snow shovel 96 cm orange sheet

$115.48
$115.48 $129.97
You save 11% ($14.49)
Tax included. Shipping calculated at checkout.

Description

With this practice shovel for snow, the annoying work of removing snow every year is done in a periquete. Efficient snow pusher: the shovel head has a size of 96 x 33.5 cm, so it can effectively clear a large amount of snow in a single pass, largely saving your energy and time. More flexible: the QUITANIEVES MANGO CAN ADJUST FROM 143 CM TO 171.5 CM TO OBTAIN THE PERFECT HEIGHT. In addition, the curved thrust plate can be adjusted to the left or to the right for greater flexibility. REVERSIBLE RABEZA with wheels: the special bidirectional sheet at an angle with "flip" function allows to push continuously snow in the same direction without having to do Great turns in U. This unique design makes the task of removing snow quickly and effortlessly. Simply lift the shovel up and down to turn the sheet 180 degrees. Durable material: The shovel tool is made of steel with durable powder coating and PP, which guarantees its lasting use.

  • Color: orange, silver and black
  • Tube material: powder coating steel, foam
  • Pala and wheel head material: polypropylene (PP)
  • Total dimensions: 96 x 39 x (142-171.5) cm (length x width x high)
  • Shovel head size: 96 x 34 cm (long x width)
  • Wheel dimensions (each): 24 x 4 cm (diameter x wide)
  • It has bidirectional wheels
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.