Skip to product information
  • FMD Mesa de centro con 2 mesitas blanco y gris hormigón 67,5x67,5x50cm
  • FMD Mesa de centro con 2 mesitas blanco y gris hormigón 67,5x67,5x50cm vidaXL
  • FMD Mesa de centro con 2 mesitas blanco y gris hormigón 67,5x67,5x50cm vidaXL
  • FMD Mesa de centro con 2 mesitas blanco y gris hormigón 67,5x67,5x50cm vidaXL
  • FMD Mesa de centro con 2 mesitas blanco y gris hormigón 67,5x67,5x50cm vidaXL

FMD Center table with 2 white and gray tables concrete 67.5x67.5x50cm

$164.99
$164.99 $185.70
You save 11% ($20.71)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This ingenious center table with an industrial style of FMD is a perfect complement to the living room. It has a modern design with two small auxiliary tables under the surface. Modern design: The decorative table has two small auxiliary tables, which can also be used as stools or as an additional storage space. They are perfect to have articles such as magazines, books and remote controls. Practical storage space: In addition, this table is the perfect solution if you are looking for a center table for the living room with a plus of space. Resistant materials: This lounge table is made of agglomerate coated with white melamine with concrete gray elements, so it will combine almost with any decoration. Easy to take care of: The center table has high scratch resistance thanks to the melamine resin coating.

  • Color: White and gray concrete
  • Material: Mellamine coated agglomerate
  • Dimensions: 67.5 x 67.5 x 50 cm (length x width x high)
  • Center table with 2 auxiliary tables / stools
  • Many placement options
  • Easy surface to take care of
  • Max. Load capacity: 50 kg
  • Max. Auxiliary table: 10 kg
  • Very scratch resistant due to melamine coating
  • PEFC certificate
  • Easy to ride
  • Manufactured in Germany

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.