Garden furniture set and gray synthetic rattan cushions

$475.53
$475.53 $535.20
You save 11% ($59.67)
Tax included. Shipping calculated at checkout.
Size
Color

Description

With this modern Synthetic Ratán garden furniture game, you can enjoy your outdoor leisure time with friends or family! These armchairs and this little table are made of water resistant ras, are easy to clean, resistant and suitable for use daily. The steel structures with powder coating make the garden set strong and robust. The center table also has a glass surface, easy to clean, and the lower shelf offers extra storage space. The reclining chairs provide all the comfort you need. The backrest is reclined using the side button. Thanks to light construction, the furniture set is easy to move. Seat cushions, very comfortable and densely padded, provide maximum comfort. Polyester covers barely require maintenance and can be removed and washed. Note: We recommend covering the set in case of rain, snow and frosts to prolong its useful life.

  • Synthetic ratan color: Gray
  • Seat color: dark gray
  • Material: synthetic rattan, solid acacia wood, powder coating steel, acid glass
  • Cojin case material: 100 % polyester
  • Table dimensions: 45 x 45 x 40 cm (length x width x high)
  • Dimensions of the chair (not reclined): 58 x 62 x 108 cm (wide x high x)
  • Dimensions of the chair (reclined): 58 x 90 x 91 cm (wide x high x)
  • Seat width: 47 cm
  • Seat depth: 47 cm
  • Seat height from the ground (without cushion): 43 cm
  • Height of the headquarters from the ground: 67 cm
  • Cushion thickness: 5 cm
  • Adjustable support
  • Requires assembly: Yes
  • Delivery includes:
  • 1 x table
  • 2 x chairs
  • 2 x seat cushions
Maximum 110 kg per seat. Take into account the risk of open fire and other sources of intense heat in the vicinity of the product.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.