Skip to product information
  • Vetonek Alfombra de exterior gris y verde agua reversible 80x150 cm

Gray and Green Outdoor Reversible Water 80x150 cm

$30.10
$30.10 $33.88
You save 11% ($3.78)
Tax included. Shipping calculated at checkout.
Size
Color

Description

If you are looking for an elegant and practical carpet, this outdoor carpet is perfect for you! Reversible design: designed to be used on both sides, this garden carpet has two options so you can combine it with decoration. If one of the sides is stained or you get bored of the drawing, you can turn it around to give the ground a renewed appearance. Durable material: Polypropylene (PP) is a popular plastic, one of the most used materials in outdoor furniture. It is light, hard and resistant to blows. Display 100% PP, this washable carpet is lasting, portable and requires little maintenance. Versatile use: The outdoor carpet has a UV coating to protect against discoloration and sun damage, and also repel the water, so it is the perfect decoration for the porch, patio, garden, etc. In addition, this lounge carpet also serves as radiant soils or anywhere in the house in order to protect soils. Easy to clean and save: this house carpet is woven to facilitate cleaning: you just have to sweep dirt or sprinkle with water and let dry. This carpet is light and easy to save to carry from PíCnic and traveling on motorhome.

  • Color: Green water and white
  • Material: 100% polypropylene (pp)
  • Tissue type: flat tissue
  • Dimensions: 80 x 150 cm (width x long)
  • Weight: 1150 g/m²
  • Repel the water

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.