Skip to product information
  • Vetonek Papá Noel inflable con luces LED 120 cm
  • Papá Noel inflable con luces LED 120 cm vidaXL
  • Papá Noel inflable con luces LED 120 cm vidaXL
  • Papá Noel inflable con luces LED 120 cm vidaXL
  • Papá Noel inflable con luces LED 120 cm vidaXL

Inflatable dad with 120 cm LED lights

$37.20
$37.20 $41.87
You save 11% ($4.67)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Take Santa Claus to the garden to create a memory for life with your family with this inflatable dad. This Christmas Santa Claus is intended to be an impressive contribution for your Outdoor Christmas decorations. Practical material: made of polyester fabric, this Christmas ornament is light, weather resistant and durable. Incorporated LED lights: Christmas Noel has incorporated LED lights inside to improve the festive atmosphere and make your home stand out. Fast and uninflaged quickly: inflatable dad has a built -in fan and can easily inflate in minutes. Unplug the adapter and Christmas decoration is automatically deflated to facilitate storage. Note: Each product comes with a mounting manual in the box to facilitate assembly.

  • Color: Multicolor
  • Material: fabric (100% polyester)
  • Dimensions: 70 x 30 x 120 cm (length x width x high)
  • LED Light Power: 3 V/0.1 A
  • Built -in fan power: 0.5 A
  • IP rating: IP44
  • Power cable length: 5 m
  • Power supply: adapter
  • With 4 LED lights and a built -in fan
  • It inflates and deflates quickly
  • Delivery includes:
  • 1 x dad Noel
  • 1x adapter
  • 1 x incorporated fan
  • 4 x LED lights

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.