Skip to product information
  • Láser Reparación Bomba de Sumidero Tapón de Drenaje de Aceite

Laser Repair Sumidero Pump Oil drain cap

$61.49
$61.49 $69.21
You save 11% ($7.72)
Tax included. Shipping calculated at checkout.

Description

This integral repair kit of oil drain plug of six sizes of current shots, oil drain and washers adapts to almost all applications. It is ideal for the repair of oil collector, gearbox and differential cap threads. This kit provides new expanded thread and replacement drain plug screws for use when existing threads are damaged or worn. It is suitable for most threads used in cars and light commercial vehicles, such as Audi, VW, BMW, Citroen, Fiat, Ford, Seat, Honda, Mazda, Mitsubishi, Opel, Peugeot, Renault, Toyota and Volvo. Fabricate with materials High quality, the kit is designed for a long life in the daily use of the workshop. All tools are delivered in a molded mold box to facilitate storage and transport.

  • Integral set for oil drain cap repair
  • Six popular sizes (M13 - M22) fit almost all applications
  • Highest quality design for long duration in the daily use of the workshop
  • It is delivered in a blowing box by blowing
  • The set includes:
  • 6 x power outlets made of HSS (fast steel) 4341: m 13 x 1.25 | M 13 x 1.5 | M 15 x 1.5 | M 17 x 1.5 | M 20 x 1.5 | M 22 x 1.5 (6 sizes, 1 unit for each)
  • 36 x Oil drainages / sink plugs made of 45cr (6 sizes, 6 pieces for each)
  • 6 sizes aluminum washers / obstructive discs

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.