Skip to product information
  • Leifheit Cepillo limpiacristales con mango telescópico 28 cm 51104

LEIFHEIT CLEANING BRUSH WITH TELSCOPIC MANGO 28 CM 51104

$57.46
$57.46 $64.67
You save 11% ($7.21)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This practical cleaning 2 in 1 of the Leifheit brand combines a brush and a rubber brush. The thick bristle brush is ideal for eliminating sand, dust or dirt, while rubber lip from rubber brightness leaves a shine without stripes after wet cleaning. Depending on the height or surface size, the caristal cleaning can be used as a manual device or extended once connected to the telescopic handle included. Its click connection system is that the handle is compatible with other LEIFHEIT cleaning heads, such as the tile and bathtub cleaner 'flexi pad' or the 'Dusty' dust brush (not included).

  • Color: Green
  • Material: Plastic
  • Total length: 120-200 cm
  • Head width: 28 cm
  • With removable telescopic mango (110-190 cm long)
  • With thick bristles to eliminate sand, dust and dirt
  • Brush with rubber edge for a shine without stripes
  • With connection system per click compatible with other cleaning heads of Leifheit, such as the 'Flexi Pad' bathtub or the 'Dusty' dust brush (not included)

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.