Skip to product information
  • Leifheit Tendedero de pie Pegasus 200 con 4 soportes pequeños

LEIFHEIT FOOT TWEEPS PEGASUS 200 with 4 small supports

$120.65
$120.65 $135.79
You save 11% ($15.14)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Leifheit's Pegasus Standing Footwear Footer solves all the needs of a mobile tader: with its parallel support legs it remains stable inside and outside. Its drying length is 20 m and offers space for almost two clothing loads. Long garments, such as bath towels or pants, dry on folding side wings. Its height of 107 cm guarantees that nothing touches the ground. Due to its undulating shape, the two outer bars of the wings are perfectly suitable for hanging hangers. Five hangers "wind proof" are included. They fit and do not fall from the bars even with a strong wind. Four supports for small garments and a dirty clothing bag are also included. Thanks to them, socks, scarves or pants can be hung easy and quickly without the need for additional hangers. The Flagasus 200 tendard is easy to install and also easy to fold. Drying bars have a special powder coating and are durable and oxide resistant.

  • Color: White and blue
  • Material: Plastic with special powder coating
  • Dimensions (deployed): 167 x 66 x 87 cm (wide x high x high)
  • Dimensions (folding): 66.5 x 6 x 95 cm (width x background x high)
  • Drying length: 20 meters
  • Stable and stable clothesline with parallel support legs
  • Space for approx. 2 clothing loads
  • With 107 cm wings to dry long garments
  • Easy to install and fold
  • Durable drying bars oxide -proof.
  • The delivery includes:
  • 4 x hangers for small objects
  • 5 x winds resistant to wind
  • 2 x bars for hanging roller clothes
  • 1 x dirty clothing bag

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.