LEIFHEIT TEREDERERO PEGASUS 150 SOLID SLIM

$83.70
$83.70 $94.20
You save 11% ($10.50)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The Flagasus 150 solid Slim from Leifheit tendard is a compact feet -shaped clothesline that offers a practical drying comfort with its folding side wings, offers a lot of space for dirty and small dirt Space space for small garments. As it only measures 55 cm narrow, it even passes through any front or balcony door. This is especially practical in case of sudden rain. With its two non -slip support legs it remains protected from the wind and robust, either on the balcony, in the garden or on smooth soils. The two side wings expand the drying length to 15 m in total. Therefore, almost two loads of clothing can be dry at the same time. Long garments have space in the 1.05 m high wings. Petasus 150 solid Slim standing trend is equipped with two small garments, which can be fixed on the side of the footing. In them you can hang socks, scarves and pants without the need for pins, simply holding them with tweezers. After use, the standing dryer can be stored horizontally.

  • Color: White and blue
  • Material: plastic and metal
  • Dimensions (displayed): 157 x 55 x 87 cm (wide x high x high)
  • Drying length: 15 meters
  • Folding side wings
  • Stable and stable trend with 2 non -slip support legs
  • Space for almost 2 clothing charges
  • With 105 cm wings to dry long garments
  • Easy to install and fold
  • Oxide -proof
  • The delivery includes:
  • 2 x supports for small objects

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.