Skip to product information
  • Leifheit Tendedero vertical Comfort Tower 420 en negro

LEIFHEIT VERTICAL TWALL COMFORT TOWER 420 IN BLACK

$159.01
$159.01 $178.96
You save 11% ($19.95)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The modern black design of the Tower 420 Tower 420s, of the Leifheit brand, makes it the ideal option for families with limited space. Space savings: It occupies just 76.5 x 70 cm of soil, so it can be placed in any corner, be it a narrow bath, a hall or even on a small balcon TERDERERO offers 42 meters in string length to dry and sufficient space for up to 4 washing machine loads. Flexible runs: it is equipped with 6 wheels that rotate 360º. This will allow you to move it easily in any direction, even when it is completely loaded with clothes. Folding design: such as the grilles of each level can be folded in half, the foot clothesline can also be used by a single side, placing it directly against the wall or radiator. It can also be folded in the plane, fitting effortlessly between the wall and the closet when it is not used. Practical schedules: additional hooks on both sides are perfect for hanging dresses, long pants or shirts.

  • Color: black
  • Material: metal, plastic
  • Dimensions (open): 70 x 76.5 x 145 cm (length x width x high)
  • Dimensions (folding): 7 x 145 cm (high x width)
  • Drying length: 42 m
  • Folding
  • 3 levels of shelves that can be folded in half to use on one side
  • Capacity for up to 4 washing machine charges
  • With 6 wheels that can turn 360 °
  • Hooks to hang garments on both sides

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.