Skip to product information
  • Leñero Vetonek 100x40x80 cm Acero oxidado

Log 100x40x80 cm oxidized steel

$163.57
$163.57 $184.09
You save 11% ($20.52)
Tax included. Shipping calculated at checkout.

Description

This firewood shelf is an ideal solution to save the firewood in an orderly manner. Durable material: Corten steel is anticorrosive by nature. It develops an oxidized protective layer against corrosion when exposed for the first time to atmospheric conditions. Therefore, it is not necessary to paint it. This can help you save on maintenance and repair costs. The distinctive brown color of steel will surely attract attention. Finally, Corten steel is exceptionally durable and will resist the passage of time. The wood away from the ground and allows a better air circulation to prevent wood from rotting, so the firewood dries better. Basic woodport collection and easily accessible. Useful information: When you receive this product, it will not yet be oxidized and will have a normal metallic color, but will oxidize over time. You can accelerate the oxidation process by spraying it with soapy water and salt water. So that your clothes are not stained, avoid contact with the developing oxide layer.

  • Material: oxidized steel
  • Total dimensions: 100 x 40 x 80 cm (length x width x high)
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.