Skip to product information
  • Vetonek Panel de ducha de vidrio 18x45,5x130 cm negro

18x45,5x130 cm black glass shower panel

$204.66
$204.66 $230.34
You save 11% ($25.68)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This multipurpose shower panel system has an elegant design and will be a great contribution to the bathroom. The shower tower is made of stainless steel and tempered glass. The temperate glass occurs with a controlled heat or chemical treatment, which makes it more durable and safe compared to normal glass. It has three shower mode: rain shower, massage jet and hand shower, which can be easily selected. Silicone nozzles are resistant to lime accumulation. Immerse yourself in a truly relaxing shower experience and enjoy the modern style of this shower panel system with a spectacular design!

  • Color: black
  • Material: stainless steel, tempered glass, plastic
  • Dimensions: 18 x 45.5 x 130 cm (wide x high x)
  • Rociator dimensions of rain mode: 15 x 15 cm (length x wide)
  • Manual artichoke dimensions: 20 x 3 cm (width x length)
  • Stainless steel hose length for water inlet: 40 cm
  • Flexible stainless steel hose length: 1.5 m
  • Glass thickness: 6 mm
  • Functions: rain style shower, 6 body massage jets, 1 manual shower artichoke
  • Rain -style shower spray, massage jets, artichoke and controls are chrome
  • With 81 jets for rain style shower, 45 jets in manual artichoke and 24 massage jets
  • Includes nylon tap with ABS handle
  • 1/2 "standard plumbing connection
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.