Skip to product information
  • Vetonek Percheros de pared 2 uds madera maciza de mango 36x110x3 cm

Percheros de pared 2 uds madera maciza de mango 36x110x3 cm

$117.62
$117.62 $132.37
You save 11% ($14.75)
Tax included. Shipping calculated at checkout.

Description

Este conjunto de perchero de madera de estilo vintage será un aporte decorativo y práctico a tu habitación. El juego de percheros te ofrecerá un lugar ideal para colgar tus abrigos, sombreros, bolsos, bufandas, etc. Los percheros están hechos de madera maciza de mango y son muy estables y duraderos. La madera de mango es una madera dura, fuerte y densa que presenta bellas vetas y contornos marrones o dorados en su superficie. La artesanía aporta al conjunto un espectacular estilo retro. Cada paso del proceso de construcción se lleva a cabo con sumo cuidado, ya sea el pulido, la pintura o el lacado. El conjunto se puede montar fácilmente en la pared. La entrega incluye 2 percheros. Nota importante: Los colores y las vetas de la madera pueden variar de una pieza a otra, por lo que cada pieza es única y ligeramente diferente al resto. La entrega es aleatoria, lo que garantiza la exclusividad e individualidad del producto.

  • Material: Madera maciza de mango + acero con recubrimiento en polvo
  • Dimensiones: 36 x 110 cm (ancho x alto)
  • Grosor: 3 cm
  • Cada tabla con 3 ganchos
  • Pulida, pintada y lacada
  • Fácil de instalar
  • La entrega incluye 2 percheros

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.