@Pet Conejera Avoriaz Blanca and Brown 147x53x85 cm 20098

$237.41
$237.41 $267.20
You save 11% ($29.79)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The luxurious Conejera Avoriaz de Pet will be the perfect house for her rabbits. Composed of a attic, a pen and a ladder, this rabbit shed offers a spacious zone so that their rabbits rest, play and exercise. The attic is easily cleaned, thanks to the removable metal drawer. There are three doors (two on the floor below and one in the superior), so that their pets can enter and leave and so that they can easily feed them. Each door is equipped with a latch to keep it well closed. The attic also has a lateral opening that gives access to the corral. With an non -slip staircase and a wide patio, their nervous friends can stay fit. The galvanized steel metal fabric allows free air circulation and keeps their pets safe while they can take a look around their surroundings. With a resistant structure of treated pine wood and an asphalt bitumen roof, rabbit shed is ideal for outdoor use where it will keep its hot, dry and safe bunny bunny. In addition, it has been manufactured thoroughly to give a rustic touch to your garden.

  • Color: White, Brown and Black
  • Material: pine wood structure + galvanized steel metal fabric + metal drawer
  • Dimensions: 147 x 53 x 85 cm (length x width x height)
  • 2 door on the lower floor and 1 door in the upper (easy to close with pestillos)
  • With asphalt bitumen roof
  • Crucadas staircase for greater support
  • With a lateral opening between the corral and the rabbit
  • Removable drawer to facilitate cleaning
  • Suitable for outdoor use
  • Easy assembly
  • Suitable for rabbits
  • Interior dimensions (cage): 59 x 38 x 49 cm (length x width x height)
  • Interior dimensions (corral): 131.5 x 38 x 59 cm (length x width x height)

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.