Skip to product information
  • Vetonek Set de mesa alta y taburetes de cocina 5 pzas tela gris oscuro

Set de mesa alta y taburetes de cocina 5 pzas tela gris oscuro

$324.03
$324.03 $324.03
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Con un diseño moderno, nuestro conjunto de mesa y sillas altas es perfecto para combinar con casas, jardines, bares, pubs o restaurantes modernos. Su diseño limpio y moderno complementará cualquier decoración de interior. La superficie está hecha de MDF, que es fácil de limpiar. La estructura de acero con recubrimiento en polvo aumenta la estabilidad y la resistencia de la mesa de bar. Las sillas de pub tienen un asiento con diseño ergonómico con respaldo integrado en un aspecto moderno y curvo. Además, son fáciles de montar. Nuestro juego muebles de bar es ideal para disfrutar de unos sorbos de vino en el bar, tomar un aperitivo en la barra de tu cocina o para usar como asientos adicionales cuando tengas invitados. La entrega incluye una mesa de bar y 4 sillas de bar.

  • Mesa alta de cocina:
  • Color: Roble
  • Material: MDF con revestimiento de PVC (superficie) + acero con recubrimiento en polvo (patas)
  • Dimensiones: 60 x 60 x 111 cm (largo x ancho x alto)
  • Taburetes de cocina:
  • Color: Gris oscuro
  • Material: Tapicería de tela y patas de metal con recubrimiento en polvo
  • Dimensiones: 51 x 49 x 99 cm (ancho x profundo x alto)
  • Ancho del asiento: 38,5 cm
  • Profundidad del asiento: 32,5 cm
  • Altura del asiento desde el suelo: 71 cm
  • Con reposapiés
  • La entrega incluye:
  • 1 x Mesa de bar
  • 4 x Sillas altas de bar
  • Material: Poliéster: 100%
Máximo 110 kg por asiento.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.