Set Garden Furniture 7 pieces and brown synthetic rattan cushions

$699.21
$699.21 $786.94
You save 11% ($87.73)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This synthetic rational sofas set consists of 2 corner sofas, 4 central sofas, 1 center table, 8 backup cushions and 6 seat cushions, and two striking red pillows, will offer a stylish resting area for your garden or patio . Thanks to the weather -resistant synthetic rattan, the patio sofas game is easy to clean, resistant and adequate for outdoor daily use. The steel structure with powdered coating make the robust and stable assembly. It is light and modular sections can be easily combined in different configurations. This game is also delivered with very comfortable and padded cushions for maximum comfort. Polyester covers that barely need maintenance can also be removed and washed. This set is easy to mount. Note: We recommend covering this furniture when it rains, snow or ice to last as long as possible.

  • Color: Brown Ratan + Cream White Cushions
  • Material: Ratán Pe + Glass board + steel structure with powder coating
  • Cushion case material: 100% polyester
  • Cushion thickness: 6 cm
  • Dimensions of the center table: 74 x 74 x 26 cm (length x width x high)
  • Corner sofa:
  • Dimensions: 70 x 70 x 54 cm (wide x high x high)
  • Seat width: 59 cm
  • Seat depth: 59 cm
  • Seat height from the ground (without cushion): 26 cm
  • Central sofa:
  • Dimensions: 70 x 70 x 54 cm (wide x high x high)
  • Seat width: 70 cm
  • Seat depth: 59 cm
  • Seat height from the ground (without cushion): 26 cm
  • Delivery includes:
  • 2 x corner sofas
  • 4 x center sofas
  • 1 x center table
  • 8 x support cushions
  • 6 x seat cushions
  • 2 x red pillows

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.