Skip to product information
  • Vetonek Set mesa y sillas altas de cocina 3 pzas madera acero antracita

Set mesa y sillas altas de cocina 3 pzas madera acero antracita

$150.02
$150.02 $168.85
You save 11% ($18.83)
Tax included. Shipping calculated at checkout.

Description

Hecho de madera y acero duraderos, este juego de mesa y sillas de bar de 3 piezas es resistente a la intemperie y será un aporte único para hogares, jardines, bares, pubs o restaurantes. Hechas de madera duradera, las superficies son fáciles de limpiar. Las estructuras de acero proporcionan una gran estabilidad. Las sillas se pueden guardar debajo de la mesa cuando no están en uso. Además, los taburetes de bar incorporan reposapiés en dos alturas diferentes, añadiendo mayor comodidad. La mesa y los taburetes de barra son fáciles de montar. La entrega incluye 1 mesa y 2 taburetes de cocina.

  • Color: Gris antracita y gris
  • Material: Madera + acero
  • Dimensiones de la mesa: 72,5 x 55 x 82,5 cm (largo x ancho x alto)
  • Dimensiones del taburete: 30 x 70 cm (diámetro x alto)
  • La entrega incluye 1 mesa y 2 sillas de cocina altos
  • Capacidad de carga máxima: 110 kg

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.