Skip to product information
  • Vetonek Sillas Butterfly para niños 2 unidades cuero auténtico negro

Sillas Butterfly para niños 2 unidades cuero auténtico negro

$177.44
$177.44 $199.71
You save 11% ($22.27)
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Nuestra silla mariposa de cuero auténtico está diseñada ergonómicamente para ofrecer el máximo relax. Es una opción ideal para dar a tus hijos todo el confort y la seguridad. Esta clásica silla butterfly de cuero auténtico cuenta con un respaldo y un asiento suavemente curvados, lo que garantiza que el cuerpo del niño tenga todo el soporte necesario con la máxima comodidad. El cuero autentico de que está hecha la silla la vuelve muy duradera. Sus cuatro esquinas están reforzadas también con cuero auténtico. La robusta estructura de acero con recubrimiento en polvo aporta estabilidad y durabilidad. Es una silla de mariposa ligera y cómoda. ¡Las sillas elegantes y cómodas son sin duda la elección perfecta para tus hijos! El envío incluye 2 sillas.

  • Color: Negro
  • Material: Tapicería de cuero auténtico + estructura de acero con recubrimiento en polvo
  • Altura total: 76 cm
  • Ancho del asiento: 56 cm
  • Profundidad del asiento: 63 cm
  • Altura del asiento desde el suelo: 30 cm
  • Tubos con recubrimiento en polvo negro
  • El envío incluye 2 sillas.
  • Material: Cuero: 100%

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.