Skip to product information
  • Vetonek Sillas de jardín plegables 6 uds madera maciza acacia y cojines

Sillas de jardín plegables 6 uds madera maciza acacia y cojines

$610.14
$610.14 $610.14
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Este juego de sillas de jardín de madera con cojines ha sido diseñado para agregar un look vintage a cualquier cena en el jardín, la terraza o el patio. La silla plegable está hecha de madera maciza de acacia, una madera dura tropical, lo que la hace estable y duradera. La superficie con acabado de aceite es fácil de limpiar con un paño húmedo. La silla de comedor se puede ajustar en 5 posiciones, para brindarte una comodidad óptima al sentarte. También se puede plegar para ahorrar espacio cuando no la uses. Además, los cojines incluidos proporcionan mayor comodidad mientras descansas o cenas. Cada cojín cuenta con dos juegos de cuerdas en ambos lados y una correa elástica detrás del respaldo para fijarlo firmemente a la silla. La entrega incluye el hardware amarillo galvanizado.

  • Color del cojín: Gris antracita
  • Material de la silla: Madera maciza de acacia con acabado al aceite.
  • Material del cojín: Tela (100% poliéster)
  • Dimensiones de la silla: 57 x 69 x 111 cm (ancho x profundo x alto)
  • Dimensiones del cojín: 120 x 50 x 7 cm (ancho x profundo x alto)
  • Reclinable en 5 posiciones
  • Plegable para un almacenamiento o un transporte fácil
  • Cuenta con correa elástica detrás del respaldo
  • Cuenta con 2 juegos de cuerdas en ambos lados
  • Requiere montaje: Sí
  • La entrega incluye:
  • 6 x Sillas de jardín con cojín
Máximo 110 kg por asiento.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.