Skip to product information
  • Vetonek Sillón de relax con taburete tela amarillo clara

Sillón de relax con taburete tela amarillo clara

$144.08
$144.08 $144.08
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

¿Buscas un sillón para descansar por completo después de un día ajetreado? ¡Este cómodo sillón relajante con reposapiés es la elección perfecta! Material suave y duradero: La tela de poliéster ofrece una combinación de suavidad, transpirabilidad y durabilidad, lo que garantiza que experimentes la máxima comodidad.Estructura robusta y estable: La estructura de madera y metal del sillón garantiza robustez y estabilidad.Cómoda experiencia de asiento: el sillón viene con un asiento y respaldo densamente acolchados, así como apoyabrazos para una gran comodidad.Reposapiés versátil: El taburete es versátil y sirve como un cómodo reposapiés para cuando estás reclinado en la silla o como asiento adicional.Múltiples usos: Es un excelente complemento como sillón de descanso para disfrutar de tu tiempo libre. También puedes usarlo en el comedor, la sala, el restaurante y el cuarto de ocio.

  • Color: Amarillo claro
  • Material: Tela (100% poliéster), metal, madera contrachapada
  • Material de relleno: Espuma
  • Dimensiones de la silla: 61,5 x 69 x 95,5 cm (ancho x profundo x alto)
  • Tamaño del asiento de la silla: 48 x 45 cm (ancho x profundo)
  • Altura del asiento desde el suelo: 38 cm
  • Altura del reposabrazos desde el suelo: 57 cm
  • Dimensiones del reposapiés: 58 x 33 x 36 cm (ancho x profundo x alto)
  • Tamaño del asiento del reposapiés: 47 x 32 cm (ancho x profundo)
  • Capacidad máxima de peso (por asiento): 110 kg
  • Requiere montaje: Sí
  • La entrega contiene:
  • 1 x Sillón de relax
  • 1 x Reposapiés

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.