Skip to product information
  • Soehnle Báscula de baño Style Sense Comfort 600 200 kg plata 63864

Soehnle Style Comfort 600 200 kg Silver 63864 bathroom

$58.14
$58.14 $65.43
You save 11% ($7.29)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Style Sense Comfort 600 bathroom scale of Soehnle is a robust scale for the whole family. It has a maximum load capacity of 200 kg and weight measurements are shown on the illuminated and extra large screen. The Style Comfort 600 style is not only more appropriate for heavyweights, but also for light weights thanks to its precise weight measurement in increases of 100 g. The extra large Illuminated LCD screen is a great contribution to the design and is even easy to read in low light conditions. With the extra clear safety glass in bright silver, the style Sense Comfort 600 is a modern, timeless, elegant and thin accessory, which adapts perfectly to any bathroom decoration. In addition, the scale offers an extra large weighing surface made of especially resistant safety glass and the base is equipped with non -slip legs. The screen turns on immediately when it gets on the balance and goes out automatically after weighing. Three 1.5 V AAA batteries are included in delivery.

  • Color: Silver
  • Material: glass + plastic
  • Dimensions: 35 x 30 x 2.6 cm (length x width x height)
  • LCD illuminated and easy to read with large digits
  • Fine design with flat surface
  • Big Extra Weighing Surface
  • Automatic ignition/off function
  • Non -slip legs make it safe to stop
  • With a battery compartment with safety closure for children with screws
  • Easy to select units in Kg, LB and ST
  • Maximum load capacity: 200 kg (in increases of 100 g)
  • Includes 3 pilas of 1.5 V AAA
To obtain the best isolation performance: - Preheat with hot water for approximately 2 minutes before filling with hot drinks - pre -hut with cold water for approximately 2 minutes before filling with cold drinks do not use to keep hot dairy products or baby foods ( bacterial growth risk). Do not use sharp, abrasive objects, solvents or bleaching agents to clean!

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.