Skip to product information
  • Vetonek Taburetes de cocina 2 uds madera mango rugosa cuero real marrón

Taburetes de cocina 2 uds madera mango rugosa cuero real marrón

$218.46
$218.46 $218.46
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

Estos suaves taburetes de barra de cocina complementarán cualquier interior con su diseño único y llamativo. Hechos de cuero auténtico combinado con madera de mango maciza, estas sillas de bar son duraderas y cómodas. Los asientos de cuero de cabra real son suaves al tacto y ofrecen una experiencia cómoda. La estructura de madera aporta robustez y los taburetes son fáciles de mover para adaptarse a cualquier entorno. Gracias a su reposapiés, el juego de taburetes de cocina puede ser un lugar perfecto para relajarse. Nota: El cuero auténtico y las hermosas vetas de la madera hacen que cada una de estas sillas de bar sea única y ligeramente diferente de las demás; la entrega es aleatoria.

  • Material: Cuero de cabra real, madera de mango rugosa
  • Dimensiones totales: 41 x 41 x 75 cm (ancho x profundo x alto)
  • Dimensiones de asiento: 35 x 15 cm (diámetro x alto)
  • Altura del reposapiés desde el suelo: 16 cm
  • Requiere montaje: Sí
  • La entrega incluye:
  • 2 x Taburetes de bar

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.