Skip to product information
  • Vetonek Sistema de soporte de telón fondo 300x300 cm verde

Telon support system Fund 300x300 cm green

$74.02
$74.02 $83.30
You save 11% ($9.28)
Tax included. Shipping calculated at checkout.
Size
Color

Description

With this complete background system, you can do what you create with your imagination as a photographer, using it in the study or elsewhere. The light system is built easily and quickly and is made of aluminum. This system includes a green cotton background that gives you the option of using chroma. The system can also be used in combination with other funds and/or paper rolls. This flexible background system is suitable for portrait photography, commercial photography and table photography. The bottom has a maximum width of 300 cm and the height can vary between 75 and 210 cm. If you want to use the system in another location, this should not pose any problem. It can be set and disassembled easily and quickly. Transport is simple with the transport bag of approximately 85x15x15 cm that is included in delivery. CROMATIC KEY: When filtering the green color of the background, you can project any image that you can imagine in the background. A known chroma example is the time of time that is really standing in front of a green wall, while graphics and forecasts can be seen behind your back.

  • Measures (saved in transport bag): 85 x 15 x 15 cm
  • Background color: green
  • Fund dimensions: 300 x 300 cm (width length)
  • Maximum height: 210 cm
  • Width: 155 - 300 cm
  • Adjustable height tripod: 75 - 210 cm
  • Material: Aluminum
  • Material: cotton: 100%

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.