Skip to product information
  • Vetonek Tumbona de jardín con dosel de ratán sintético gris

Garden Synthetic Ratán Garden Garden Loom

$848.13
$848.13 $954.56
You save 11% ($106.43)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This lock bed will be an ideal shelter to relax and enjoy your free time near the pool, in the garden, in the patio, etc. With this elegant loup, you can show your appreciation for the environment and your modern lifestyle. The sunbed is made of durable, water resistant, resistant to UVA rays, stain resistant, easy to clean and, above all, respectful of the environment. Thanks to the thick cushions and removable cushions of the seat, it is quite comfortable. The sliding roof protects you from the sun when you read or relax in the sun lounge on sunny days. Built with a robust but light steel structure, this modern rational lorage is very durable. Note: We recommend covering the sunbed when doing wrong, such as rain, snow or frost.

  • Color: gray and anthracite
  • Material: Ratán PE, fabric (100 % polyester), steel
  • Total dimensions: 230 x 145 x 141 cm (wide x high x high)
  • Dimensions without capota: 230 x 145 x 80 cm (wide x high x high)
  • Seat width: 224 cm
  • Seat depth: 142 cm
  • Seat height from the ground (with cushion): 38 cm
  • Pillow size: 45 x 45 cm
  • Gas elevation mechanism: yes
  • Requires assembly: Yes
  • Delivery contains:
  • 1 x oval loupeon with canopy
  • 5 x pillows
  • 2 x seat cushions

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.