Skip to product information
  • Ubbink AlgClear UVC 5000 7W

UBBINK ALGCLEAR UVC 5000 7W

$105.93
$105.93 $119.21
You save 11% ($13.28)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This UVC 5000 algclear of Ubbink keeps the water from your clean pond by eliminating the germs responsible for the unwanted growth of algae by means of ultraviolet radiation. This UVC unit can be used in combination with pond filters (not included) that absorb accumulated algae. It is suitable for ponds with a maximum volume of 3000 L / 6000 L (pond with fish / pond without fish). The calculation of the pond clarification power performance that must be chosen according to volume (l) of the pond with/without fish presence is as follows: For ponds without fish: 1 W of UVC power per m³ of volume. For ponds with ponds with ponds with Fish: 2 W of UVC power per m³ of volume. For ponds with koi tent: 4 W of UVC power per m³ of volume.

  • Food: 230 Vca / 50 Hz
  • UVC type lamp: PLS 7 W
  • UVC departure after 8,000 hours: 85%
  • Maximum pond capacity without fish: 6000 L
  • Maximum pond capacity with fish: maximum 3000 L
  • Maximum pressure load: 0.049 MPa
  • Input connection: 38 mm (1 1/2 ")
  • Departure connection: 38 mm (1 1/2 ")
  • UVC Lamp of spare and quartz glass filter available separately
  • It works with water temperature from +5 ° C a +35 ° C
  • Very effective against green algae, bacteria and other pathogens.
  • Without causing harmful effects for plants and fish
  • Delivery includes:
  • UVC device
  • 2 assembly supports
  • 2 universal hose connectors
  • 1 x input accessory 1½ "and 2 x download accessories 1½"
  • 1 UVC lamp
  • 1 protective cover for PLL lamps
  • 1 Instruction Manual

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.