UBBINK FLRO DE PRA

$284.11
$284.11 $319.76
You save 11% ($35.65)
Tax included. Shipping calculated at checkout.
Size
Color

Description

The 8000 Plusset of Ubbink stail filter is a three cameras filtration system. Mechanical filtering (with filter mats and bio granules) takes place in the first camera, and biological filtering takes place in the second camera. It consists of a fine filter sponge, bio granules and a filter medium with a strain of bacteria that guarantees that the water remains transparent. The UVC unit ensures that algae growth is under control. Ubbink Ecoimax podium pumps are high quality products based on the latest technology. Pumps use synchronous technology and are suitable for use in garden ponds, fountains and also in combination with source jets and spray figures. The filtraclear series consists of 2 sets: basicset: 1x filtrale + 1 x algclear, the appropriate pump should be ordered extra plusset: 1x filtrale + 1 x algclear + 1 pond pump, this is a complete set to keep the water in its clear pond And clean, it is important to filter the water. You can use the UBBINK filtraclear basic or ubbink filtracar plus set for this. Filtrachle is a closed filter system with multiple cameras for biological-mechanical cleaning of water in its pond.

  • Dimensions: 39.5 x 29.5 x 39 cm (width x depth x height)
  • Ubbink filtrale, 3 cameras 25 L
  • Suitable for ponds without fish 8000 L
  • Suitable for ponds with 4000 L fish.
  • UBBINK ALGCLEAR UV-C 7000
  • Power: 9 w
  • ELIMAX 2000 Pond pump
  • Food: 230 V ~ / 50 Hz
  • Power cable length: 10 m
  • Flow: 2000 l/h
  • Delivery includes:
  • 1 x ubbink filtrade
  • 1 x ubbink algclear
  • 1 x ubbink eldex 2000
  • Assembly material:
  • 1 x zeolith with mesh: 1.8 kg
  • 1 x bio centers with mesh
  • 1 x Mesh substrate filter: 3 kg
  • 2 x Filter sponjsa 35 mm, 1 x ppi black 10, 1 x ppi blue 20
  • 1 x Bola valve 1 ", nut and washer
  • 1 x hose pond for filter residues: 1 m x 40 mm
  • 1 x hose pond for filter supply: 3 m x 19 mm
  • 3 x hose clip: 1 x (38-42) mm + 2 x (20-23) mm

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.