Skip to product information
  • Ubbink Segmento de cascada de acero inoxidable Wolga esquina izquierda

Ubbink Segmento de cascada de acero inoxidable Wolga esquina izquierda

$168.83
$168.83 $190.01
You save 11% ($21.18)
Tax included. Shipping calculated at checkout.

Description

La cascada Wolga de Ubbink, una cascada modular para estanques, consta de tres segmentos disponibles por separado, lo que le permite realizar diversas combinaciones para que encajen en el espacio disponible y según sus preferencias. Este segmento es una esquina izquierda que puede añadir a su cascada Wolga de Ubbink. Gracias a su moderno diseño, el segmento de acero inoxidable para la cascada Wolga de Ubbink creará un elemento acuático extraordinario que embellecerá el paisaje de su jardín. Es totalmente apta para estanques de jardín, arroyos, etc. Además, este segmento para cascada de jardín se monta fácilmente sobre una pared. Asimismo, está hecho de acero inoxidable 304, lo que garantiza muchos años de servicio y una excelente durabilidad. ¡Consiga esta cascada para estanques de Ubbink y sueñe con una suave cascada ondeante en su propio patio!

  • Color: Plateado
  • Material: Acero inoxidable 304
  • Dimensiones: 48 x 48 x 4 cm (anchura x profundidad x altura)
  • Segmento de esquina izquierda para el arroyo modular Wolga de Ubbink

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.