Skip to product information
  • wolcraft Juego para engalletadora 700 pzas para ensamblar tablas

WOLCRAFT ENGALLERATOR GAME 700 PCAS TO ASSEMBLY TABLES

$161.39
$161.39 $181.64
You save 11% ($20.25)
Tax included. Shipping calculated at checkout.

Description

This 700 -piece Wolcraft worship set allows you to assemble the platforms invisibly at the bottom of them. You can be sure of the result, which will meet the highest standards. No visible fixations for a high -end appearance: this game is perfect to set the terrace pallets invisible at the bottom of the tables. That is, the cut screws or broken terrace boards are over. Optimally installed tarimas: the adorns create a distance between the beams of the platform and the platforms. This protects them against waterlogging, ensures optimal ventilation and means uninterrupted enjoyment of the wooden terrace for many years.

  • Color: Brown
  • Material: Plastic
  • Dimensions: 26 x 10 x 17 cm (wide x high x high)
  • 700 pieces of exterior platforms for 700 pieces
  • To assemble wooden platforms invisible
  • They create distance between the platform beams and the wooden boards
  • For optimal ventilation and protection against waterlogging and premature rot
  • The movement zone of the adorns compensates for the expansion and contraction movements of the wood
  • To achieve an impeccable appearance and table surfaces without damage
  • The delivery contains:
  • 100 x decorating for hidden fixation
  • 600 x stainless steel screws Tx 20

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.