Skip to product information
  • wolfcraft Estante modular para apilar leña XXL 5125000

Wolfcraft Modular shelf to stack firewood XXL 5125000

$151.61
$151.61 $170.63
You save 11% ($19.02)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Wolfcraft's stacking shelf is a XXL firewood shelf with 4 units of extension, each of them with a length of 42.5 cm, which allows it to build the unit on different heights and wide to optimize the space in its garage or booth. It can be loaded to a height of 1.4 m or a width of 3.2 m, for a maximum capacity of 1.6 m³ of firewood and is ideal for outdoor use. This adjustable Wolfcraft firewood shelf can be set and disassembled quickly and without tools.

  • Gray
  • Material: Metal
  • Dimensions (mounted): (176,6-324.1) x 25.6 x (103.6-146) cm (width x height x length)
  • To apply firewood between 25 - 50 cm
  • The 5 plastic spacers provide optimal ventilation for wood from the bottom
  • The 4 units of extension, each with a length of 42.5 cm, allow to build the unit in several heights and wide.
  • It can be loaded up to a height of 1.4 m or a width of 3.2 m, for a maximum wood volume of 1.6 m³
  • Fast assembly and disassembly without tools
  • Ideal for outdoor use
  • Weight: 8 kg
Security information • Use the appropriate personal protective equipment. Safety glasses and adequate protective gloves avoid splinters. Safety boots can avoid injuries due to the fall of wood pieces. • Before starting working, check that the stacking device works. Check that all screwed unions are tight and that all pressure connections are safe. Do not use the stacking device if the pieces are damaged. • Place the stacking device on a firm, level and horizontal surface to guarantee its stability. • Do not use the stacking device such as step, staircase or support. • Before filling the stacking device, put it with one side against a firm wall. If the stacking device is not filled against a firm wall, it can turn. • Caution: Be careful to never exceed the maximum 1.4 m filling height. • Never introduce your fingers into the firewood battery. Danger of crushing and splinters! • Keep the work space clean and well illuminated. Disorderly or dirty work areas can cause accidents. • Keep children and other people away while using the stacking device. If distracted, you can lose control of the device.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.