Skip to product information
  • wolfcraft Sargento monomanual EHZ 65-300 3457000

Wolfcraft Sergeant Monomanual EHz 65-300 3457000

$32.68
$32.68 $36.78
You save 11% ($4.10)
Tax included. Shipping calculated at checkout.

Description

This sergeant of one hand Wolfcraft EHZ 65-300 is a professional degree clamping tool. With the EHZ 65-300 model, it can be fastened quickly, safely and practically with one hand. The clamp can easily convert the propagation function just by pressing a button. The monomannual sergeant has a high quality rail that provides a high and prolonged clamping force. It has a cross slot to safely hold round objects. Thanks to the optimal lever force, the fastening pressure is very easy to release. With the large areas of clamping and the vein of the 65 mm gag, the fastening force will be distributed evenly and is soft with the work piece. The sergent with one hand has an ergonomic grip with non -slip zone, allowing easy handling and safe support.

  • Depth: 65 mm.
  • Grip width: 300 mm
  • Expansion range: 160-470 mm
  • Practical, fast and safe grip with one hand
  • Robust and powerful: fastening force of up to 90 kg.
  • Simple management and safe fastening thanks to the ergonomic handle with non -slip zone
  • For professionals: change effortlessly to the opening function with just pressing a button
  • Uniform distribution of pressed and gentle force towards the workpiece.
  • High quality rail that guarantees a high and prolonged clamping force
  • Very easy to liberate the fastening pressure thanks to optimal leverage
  • Cross slot to press round objects safely

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.