Skip to product information
  • XQ Max Tabla de paddle surf Shark 305x71x15 cm

XQ Max Paddle Table Shark 305x71x15 cm

$394.45
$394.45 $443.95
You save 11% ($49.50)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This dark and white gray paddle table of XQ Max, Shark model, has a rounded design with a double base. It is comfortable and stable enough to learn, row recreationally and make short walks thanks to the wide platform to stand. Paddle Surf's inflatable table is easy and fast to inflate and deflate. It slides effortlessly for flat waters. So Join the last Tinde of Fitnes and start practicing Paddle Surf! The Paddle Surf set is suitable for a maximum weight of 150 kg. The Paddle Surf table set also has D -shaped rings for the chair assembly (chair not included). The SUP table of the XQ Max brand has three fins: two fixed small fins and a larger fin. Experience surfers can remove the big fin. The fin is easy to remove and put. With low tides, it is better to remove the large fin. Otherwise, you can touch the background. The delivery includes an adjustable surf paddle rowing, a spiral belt, a repair kit, a PSI pump, and a backpack with animal print for easy and fast transport.

  • Color: dark and white gray
  • Material: PVC
  • Dimensions: 305 x 71 x 15 cm (length x width x high)
  • With non -slip Eva pads
  • Load capacity: max. 150 kg
  • Rounded design
  • With 4 rings in D
  • With 3 fins (one is removable)
  • Delivery includes:
  • 1 x adjustable removable of Paddle Surf (170-210 cm)
  • 1 x pump pump
  • 1 x spiral strap
  • 1 x repair kit
  • 1 x backpack
  • 1 x manual

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.