Skip to product information
  • XQ Max Tabla de surf Sup azul y negro 245 cm

XQ MAX Surf Table Supp Blue and Black 245 cm

$265.74
$265.74 $299.08
You save 11% ($33.34)
Tax included. Shipping calculated at checkout.
Size
Color

Description

With this beautiful blue and black surf table 245 cm from XQ Max, you can easily surf! The Surf Table and SUP game has a complete design for surf and for paddle surf. It is reinforced with an additional PVC strap on both sides. Paddle Surf's inflatable table is easy and fast to inflate and deflate. It slides effortlessly for flat waters and travels without problems surfing. So join the last trend in sports and start practicing Paddle Surf. The Paddle Surf table set is suitable for a maximum weight of 90 kg. Delivery includes a coil strap, repair kit, a PSI pump and a transport bag to facilitate the transfer. Note: Delivery does not include rowing

  • Color: blue/black
  • Material: polypropylene
  • Dimensions: 245 x 57 x 10 cm (length x width x high)
  • Load capacity: max 90 kg
  • With non -slip pads
  • Reinforcement with additional strip on both sides
  • Recommended Age: From 14 years
  • Delivery includes:
  • 1 x spiral strap
  • 1 x repair kit
  • 1 x pump pump
  • 1 x transport bag
  • 1 x manual
  • WARNING: Not suitable for children under 36 months.
  • WARNING: It must be used under the direct supervision of an adult.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.