XQ Max Tabla de paddle surf Jellyfish 305x71x15 cm

$404.14
$404.14 $454.85
You save 11% ($50.71)
Tax included. Shipping calculated at checkout.

Description

Esta tabla de paddle surf naranja, negra y blanca de XQ Max, modelo Jellyfish, posee un diseño redondeado con una base doble. Es lo bastante cómoda y estable para aprender, remar de forma recreativa y hacer paseos cortos gracias a la amplia plataforma para estar de pie. La tabla hinchable de paddle surf es fácil y rápida de inflar y desinflar. Se desliza sin esfuerzo por aguas planas. ¡Así que únete a la última tendendia de fitnes y comienza a practicar paddle surf! El set de paddle surf es adecuado para un peso máximo de 150 kg. El set de tabla de paddle surf posee anillos en forma de D para el montaje de la silla (silla no incluida). La tabla de SUP de la marca XQ Max tiene tres aletas: dos aletas pequeñas fijas y una aleta más grande. Los surfistas con experiencia pueden quitar la aleta grande. La aleta es fácil de quitar y de poner. Con mareas bajas, es mejor retirar la aleta grande. De lo contrario, puede tocar el fondo. La entrega incluye un remo de paddle surf regulable, una correa en espiral, un kit de reparación, una bomba PSI, y una mochila con estampado animal para un transporte fácil y rápido.

  • Color: Naranja, negro y blanco
  • Material: PVC
  • Dimensiones: 305 x 71 x 15 cm (largo x ancho x alto)
  • Con almohadillas de EVA antideslizantes
  • Capacidad de carga: Máx. 150 kg
  • Diseño redondeado
  • Con 4 anillos en D
  • Con 3 aletas (una es extraíble)
  • La entrega incluye:
  • 1 x Remo regulable de paddle surf (170-210 cm)
  • 1 x Bomba PSI
  • 1 x Correa en espiral
  • 1 x Kit de reparación
  • 1 x Mochila
  • 1 x Manual

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.