Skip to product information

Pavement Grating Grass 50x50 cm.

$32.73
$32.73
Tax included. Shipping calculated at checkout.
Container
Size
Color

Description

Square non-slip garden slab measuring 50x50x10 cm, made of concrete, with the particularity of having 16 square spaces to place grass, fine gravel or sand, available in gray or cream.

Each piece weighs 40 kg (160 kg/m²) and is intended for pedestrian use or light vehicle traffic.

With a rustic stone look, they bring together beauty, hardness and durability at a low price.

They are easy to place on a bed of gravel, sand or on the ground itself thanks to their hardness and great thickness, well placed they support the passage of light vehicles without any problem.

 

The perfect combinations 

Perfect pieces to create paths and paths in your garden, entrances to garages or pedestrian areas, with a good height to accompany it with grass or gravel of 3-6 mm.

It will be perfect if you like gardens with contrasts between colors.

Gray lattice slab + Premium White Gravel

Cream lattice slab + Gravel Gravel

 

How is it installed?

Here you have all the steps to follow for the installation of the grass lattice slab.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.