Skip to product information
  • Losa jardín hormigon blanco con forma ovalada
  • Pasos japoneses blancos y forma redondeada ovalada
  • Losa jardin muy gruesa

Japanese Pebble Step

$20.06
$20.06
Tax included. Shipping calculated at checkout.
Size
Container

Description

SlabsOriginal and different Japanese white concrete step, large in size and contemporary in appearance, will stand out in your garden whether surrounded by decorative gravel or on the grass itself.

Made of state-of-the-art GRC concrete that provides ultra-resistance with little thickness, incorporates recycled materials and an exquisite finish, it is a new product launched in November 2020.

 

Placement of Japanese stepping stones

It can be placed on the garden soil itself, on grass or on gravel, it is very resistant, it is recommended to make it stable and comfortable underfoot, placing it on a thin layer of sand, 1 or 2 centimeters is enough, this way The piece will remain fixed in the place you want and will not move.

 

Sizes of the 3-piece Pebble series

For now only the largest piece 70x57x3.5 cm is available. In the first half of 2022, the 2 smallest pieces will arrive.

Piece No. 1, the largest, has an approximate weight of 30 kg. and an approximate thickness of 3.5 cm.

 

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.