Skip to product information
  • Vetonek Set de inodoro 10+10L y lavabo portátil de camping 20L gris

10+10l toilet set and Portable Camping Gray Sink

$220.91
$220.91 $248.64
You save 11% ($27.73)
Tax included. Shipping calculated at checkout.

Description

This portable set, which includes a toilet and a pedestal sink, is designed to go from camping is more practical and pleasant! The toilet has a 10-liter waste tank that makes it appropriate for a use of 2-3 days for an adult. The toilet for caravan has a 10 -liter fresh water tank that allows you to download at least 50 times. The discharge of 3 T -type T pathways facilitates the removal of waste. The side pestillos facilitate the disassembly and fixation of both deposits. The sliding valve helps protect you from leaks and bad odors. The camping sink is equipped with a 3 -liter soap dispenser, a towel and a 17 -liter water tank. It has a useless design by stepping on the standing pump to provide a water jet. The pedestal sink has two integrated wheels to facilitate its transport.

  • Color: gray and white
  • Material: HDPE (High density polyethylene polypilen)
  • Camping toilet:
  • Dimensions: 41.5 x 36.5 x 30 cm (length x width x high)
  • Seat height: 29.5 cm
  • Waste deposit capacity: 10 L
  • Fresh water tank capacity: 10 L
  • Load capacity: 200 kg
  • With two side closures
  • With a sliding valve
  • Manual cistern
  • Type T download nozzle
  • Sink with pedestal for camping:
  • Total dimensions: 50.5 x 33 x 103 cm (length x width x high)
  • Fresh water tank capacity: 17 L
  • Hand soap dispensed capacity: 3 L
  • With a towel
  • With a soap support
  • Standing pump design
  • With a fresh water tank
  • Integrated wheels
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.