Skip to product information
  • Vetonek Pasteca de acero 10 toneladas

10 tons steel paste

$43.51
$43.51 $48.97
You save 11% ($5.46)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Made of powder coating steel, the high -resistance start block doubles the efficiency of a cable and, therefore, is perfect for pulling heavy loads. The piece of steel pulley is designed to mounted on cable raws and pulleys, to double the traction force with a maximum load of up to 10,000 kilograms. The pulley can also contribute in a practical way to the investment of the traction address. The pulley is suitable for all strings with a diameter of 1 to 15 mm. The 2 completely rotating parts can be pushed against each other and, therefore, allow the rope to easily introduce. Therefore, the pulley is flexible, either when towing a vehicle or in rescue operations. The steel material makes it for its weather resistance, its great reliability and a long shelf life. Therefore, it is essential for all professionals. The product is not suitable for lifting and only to throw. WARNING: Check if the product is deformed or damaged before using it.

  • Color: black
  • Material: Steel with powder coating
  • Dimensions: 130 x 48 x 262 mm (length x width x high)
  • Maximum load capacity: 10 tons
  • Rope diameter: 1 - 15 mm
  • Just apt to throw
  • Not suitable for lifting

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.