Skip to product information
  • Vetonek Invernadero de acero galvanizado verde 100x100x77 cm

100x100x77 cm green galvanized steel greenhouse

$114.86
$114.86 $129.28
You save 11% ($14.42)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This spacious greenhouse can house a lot of plants and will be the perfect solution to protect your cold plants. The ceiling can be opened to allow air circulation. Made of PC board and galvanized steel, this greenhouse is extremely durable and with a beautiful design. It is wide and deep enough to house a large amount of land and offer wide space for your plants, vegetables, herbs and flowers. Thanks to its simple square design, it will be an elegant contribution for any balcony, patio or terrace. In addition, the edge of the pot has a folded design so it does not have sharp corners. The product is easy to mount. Keep in mind that the greenhouse roof does not support intense snowfall.

  • Color: Green
  • Upper material: aluminum frame + PC board
  • Material from the bottom: galvanized steel
  • Dimensions: 100 x 100 x 77 cm (width x depth x height)
  • With gray anthracite finish
  • With folded edges for greater safety
The greenhouse is not a construction building or a greenhouse for recreational purposes. It is an independent and temporary agricultural installation destined only to recreational gardening.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.