Skip to product information
  • Vetonek Set muebles de jardín 3 piezas con cojines ratán sintético gris

3 -piece garden furniture set with gray synthetic cushions

$346.05
$346.05 $389.47
You save 11% ($43.42)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This combined style and functionality and functionality set is destined to be the focus of your garden or patio. This synthetic ration living room is resistant and adequate for exteriors throughout the year. Thanks to the Ratán Pe resistant to weathering and water, the set of outdoor furniture is easy to clean, resistant and ideal for daily use. The seat has a robust steel structure with powder coating, which is very durable. It is light, so it is easy to move. The stool can also move freely. The thick removable cushions of the seat and backup with vertical fiber cotton fill guarantee maximum comfort when sitting. The easy -to -clean polyester covers with hidden zippers can be removed and washed. This exclusive modular sofas set is very flexible and can easily organize and move to adapt to any environment. Note: We recommend covering the set with rain, snow and frost for a lasting useful life.

  • Gray
  • Cushion color: dark gray
  • Material: PE ratán, powder coating steel
  • Cushion case material: 100% polyester
  • 3 -seat couch dimensions: 180 x 58 x 58 cm (wide x high x high)
  • Stool size: 58 x 55.5 x 30 cm (length x width x high)
  • Dimensions of the center table: 70 x 45 x 32 cm (length x width x high)
  • Sofa seat cushion thickness: 5 cm
  • Sofa's backing cushion thickness: 8 cm
  • Seat cushion thickness 4.5 cm
  • Delivery contains:
  • 1 x three -seater sofa
  • 1 x stool
  • 1 x center table
  • 3 x seat cushions
  • 3 x support cushions

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.