Skip to product information
  • Vetonek Paneles de pared 3D 5 unidades EPS marrón 100x50 cm

3D wall panels 5 units EPS Brown 100x50 cm

$156.03
$156.03 $175.61
You save 11% ($19.58)
Tax included. Shipping calculated at checkout.
Size
Color

Description

You can convert an empty and boring wall into a design element with these 3D wall panels! Panels can be placed anywhere as wall coatings. Durable and resistant material: These panels are made of EPS foam, which makes them water resistant and easy to clean. In addition, these panels not only isolate from moisture, cold, heat and voice, but also maintain their form with the passage of time. Thermalication: the material of these panels provides thermal insulation, helping to maintain the stability of The temperature inside the exquisite design: wall coverings have a realistic wood texture that provides a rustic atmosphere to your room. room, living rooms, corridors, hotels, restorating, offices, pubs, shopping centers, coffee shops, etc. Useful information: The glue is not included in the delivery. Each article is unique, with color and vein variations. Delivery is random guaranteeing the exclusivity and individuality of the product.

  • Color: Brown
  • Material: EPS foam (expanded polystyrene)
  • Dimensions (each panel): 100 x 50 cm (length x wide)
  • Thickness: 2.5 cm
  • Weight (each panel): 2.98 kg
  • Wood print
  • Shock -proof
  • Waterproof
  • Spots resistant
  • Keep the form
  • Provides thermal insulation
  • Installation Method: Stick
  • Delivery contains:
  • 5 x wall panels

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.