Skip to product information
  • Vetonek Papel pintado 3D no tejido aspecto piedra gris claro 10x0,53 m

3D wallpaper non -woven Light gray stone appearance 10x0.53 m

$13.54
$13.54 $15.24
You save 11% ($1.70)
Tax included. Shipping calculated at checkout.
Size
Color

Description

Turn your white wall into a design element and create a visual show in your home with the wallpaper. Effectively hidden wall defects such as cracks, chokes, scratches or small irregularities. Non -woven fabric: This duplex wallpaper is made of non -woven fabric that is breathable, durable and wear resistant. Thanks to its thick texture, this wallpaper has a good acoustic and thermal insulation. Cutting fácile: you can easily cut the wall paper in any size or shape that you need to meet your specific needs. Exquisite design: the wall lining has a Realistic stone brick texture that adds a rustic atmosphere to your room. APPLICATIONS APPLICATIONS: This non -woven wallpaper is versatile and can be used on TV background, in rooms, bedrooms, coffee shops, restaurants, etc. It is perfect to create decorative walls or renew furniture. Useful information: This wallpaper has no adhesive on its own, so it is necessary to use tail or glue for wallpaper to place it. The tail is not included in the delivery. The wallpaper is not waterproof. But it can be gently cleaned with a humid cloth when necessary. To avoid color variations between different lots, we recommend that you buy enough wallpaper at once.

  • Color: light gray
  • Material: non -woven textile
  • Dimensions: 10 x 0.53 m (long x width)
  • Total area: 5.3 m²
  • Presents stones pattern
  • Duplex wallpaper
Children must be supervised to make sure they do not play with the device. Keep children away from the assembly area. CAUTION: Read the instructions carefully before using and keep them for future consultations.

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.