Skip to product information
  • Vetonek Mesa de jardín Adirondack HDPE azul agua 38x38x46 cm

Adirondack HDPE Blue Garden Blue Water 38x38x46 cm

$75.83
$75.83 $85.34
You save 11% ($9.51)
Tax included. Shipping calculated at checkout.
Size
Color

Description

This minimalist garden Adirondack table is designed to be the focus of your outdoor zone. The patio table is made with HDPE resistant to weathering and UVA rays (high density polyethylene). This material perfectly improves the deficiencies of solid wood, which is easy to deteriorate and crack, especially in rainy days. The garden auxiliary table does not require paint, staining, waterproofing or similar maintenance. You just need to wash with soap, water and soft bristle brush. With minimal care, this lasting table will provide years of use. The resistant table allows you to place the phone, sunglasses, drink and other small objects. Note: To prolong the life of your outdoor furniture, we recommend that you protect them with a waterproof case.

  • Color: Water blue
  • Material: HDPE (high density polyethylene), steel
  • Dimensions: 38 x 38 x 46 cm (wide x high x)
  • Long duration
  • Low maintenance
  • It can detach from water easily
  • You can handle different types of weather conditions better than most types of wood
  • Requires assembly: Yes

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.