Skip to product information
  • Vetonek Alfombra de baño Dakota platino gris y negro 55x65 cm

Alfombra de baño Dakota platino gris y negro 55x65 cm V22

$45.65
$45.65 $45.65
Tax included. Shipping calculated at checkout.
Tamaño
Color

Description

¿Odias salir de la ducha sobre los fríos azulejos del suelo del baño? Aquí resulta útil la cómoda y segura alfombra de baño Dakota Platinum de Kleine Wolke, de color gris y negro y con unas medidas de 55 x 65 cm. Además de comodidad, esta alfombra de baño también aporta seguridad, al reducir el riesgo de resbalones sobre los suelos de baldosas mojados y desnudos. La alfombra de baño Dakota Platinum posee un estampado de bloques y líneas en combinaciones de colores a juegos. Está hecha 100% de poliacrílico, que es una fibra sintética cuyos hilos son cálidos y suaves y que se parece a la lana. Gracias a este material y a una altura de pelo de nada menos que 20 mm, esta alfombra de baño resulta agradable, suave y gruesa, y es un placer pisarla. La alfombra se puede lavar en lavadora con un ciclo delicado a 40 °C y también se puede secar en secadora a baja temperatura.

  • Color: Gris y negro
  • Material: Poliacrílico
  • Dimensiones: 65 x 55 x 2 cm (largo x ancho x alto)
  • Altura del pelo: 20 mm
  • Cálido y suave
  • Lavable en la lavadora a 40 ºC
  • Secadora a temperaturas bajas
  • Adecuado para calefacción por suelo radiante

How much stone do I need?

How much stone do I need for the ground?

For shot and gravel song:
• ± 80kg per m², based on a 5cm layer.*For granulometries> 32mm a thicker layer is necessary.• Saca consumption: 1000kg = 0.625m³.
• Covering capacity: ± 12.5m² with a layer of 5 cm.

For pine cortex:
• ± 70L per m², based on a 5cm layer.
• Saca consumption: 1000L = ± 1m³ = ± 600kg
• Covering capacity: ± 14m² with a layer of 5 cm.

For volcanic, slate and chamota:
• ± 50kg per m², based on a 5cm layer.
• Saca consumption: 1000kg = ± 1m³
• Covering capacity: ± 20m² with a layer of 5 cm

How much stone do I need to fill a gabion?

Density of ± 1,650kg by 1m³.

The calculation is very simple to understand with an example, if you have a 100x50x30 cm gav. You have to make the following accounts:
1x0.5x0,3 = 0.15m³
0.15x1,650 = 247.50kg. stone.
*It is always good to calculate an extra 5%, since the gavions when filling them are a little and always enters some more stone than in the theoretical calculations.

Clarifications

ATTENTION!

Granulometries are sizes of sizes

Real sizes can vary slightly, since when talking, for example, 60-80mm stone, it means that the stones pass through a square mesh of 80x80mm. and do not go through a 60x60mm.
This 80x80 mesh can pass a 100mm stone. long and 65mm. wide so there may be a percentage of stones greater than 80 and less than 60mm.

Broken stones

On the other hand, in the stones of more than 60mm. There is a percentage of up to 10% stones that can be broken during classification, washing, loading and downloading, today we have no machinery that avoids those breaks.

In the photos you can see, only real products are seen, broken pieces have been removed.

Dust and sand in products

This product is not washed, so it contains dust, sand and even traces of other products due to processing and transport. This is not a problem when using it; The stone will be washed alone over time or can throw water before using it.